Lexmark MS832, MS835 Bin Setup menu, Portrait Width, Portrait Height, Feed Direction, Output Bin

Understanding printer menus		94
	Use	To
	Portrait Width	Set the portrait width.
	3–8.5 inches	Notes:
	76–216 mm
		• If the width exceeds the maximum, then the printer uses the
		maximum width allowed.
		• 8.5 inches is the US factory default setting. You can increase the
		width in 0.01‑inch increments.
		• 216 mm is the international factory default setting. You can increase
		the width in 1‑mm increments.
	Portrait Height	Set the portrait height.
	3–14.17 inches	Notes:
	76–360 mm
		• If the height exceeds the maximum, then the printer uses the
		maximum height allowed.
		• 14 inches is the US factory default setting. You can increase the
		height in 0.01‑inch increments.
		• 356 mm is the international factory default setting. You can increase
		the height in 1‑mm increments.
	Feed Direction	Specify the feed direction if the paper can be loaded in either direction.
	Short Edge	Notes:

Long Edge

•Short Edge is the factory default setting.

•Long Edge appears only when the longest edge is shorter than the maximum width supported in the tray.

Bin Setup menu

Use

Output Bin

Standard Bin

Bin [x]

To

Specify the default bin.

Notes:

•If multiple bins are assigned the same name, then the name appears only once in the menu.

•Standard Bin is the factory default setting.