3.Insert the supplied AC adapter’s barrel plug into the DC IN 9V jack on the back of the base.
4.Route the adapter’s cord through the left side of the strain relief slot on top of the base and through the left slots at the bottom of the base.
Strain Relief
Slot
5.Plug the short modular cord into the wall plate jack, press the excess cord into the slot in the center of the base, then align the base’s keyhole slots with the wall plate studs and slide the base downward to secure it.
Slot for
Excess
Cord
6.Press and lift out the handset holder, turn it over and rotate it 180°, then snap it back into place so it holds the handset.
7.Plug the adapter into a standard AC outlet. The POWER indicator on the base lights.
8.Lift the base’s antenna to a verti- cal position.
Mounting the Base Directly on the Wall
For this mounting method, you need two
1. Drill two holes | 315/16 | 3/16 | |||||
inches | apart. | Then |
|
|
|
|
|
|
|
|
|
| |||
thread | a screw into |
|
|
|
|
| |
|
|
|
|
| |||
|
|
|
|
| |||
each hole, letting the |
|
|
|
|
| ||
heads | extend | about |
|
|
|
|
|
315/16 |
|
|
| ||||
3/16 inch from the |
|
|
|
|
| ||
|
|
|
|
| |||
wall. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
7
