3.Plug one end of the supplied long modular cord into the phone line jack on the back of the base.
Mounting on a Wall Plate
1.Push in the two tabs on the top of the mounting bracket, then lift off the entire bracket.
illus -- enlarge to fill space
4.Plug the AC adapter into a standard AC outlet.
5.Plug the modular cord’s other end into a modular phone line jack.
6.For the best reception, adjust the base’s antenna so it stands straight up.
2.Plug one end of the supplied short modular cord into the phone line jack on the back of the base, then press the cord into the center groove on the bottom of the base.
3.Insert the supplied AC adapter’s barrel plug into the DC 9V jack on the back of the base. Then route the cord through the strain relief slot and press the cord all the way down into the groove on the bottom of the base.
illus -- label strain relief
7
