To answer a call, press TALK. TALK appears. To end a call, press TALK again.
ADJUSTING THE VOLUME
To adjust the volume of the sound you hear through the headset dur- ing a call, slide VOLUME on the side of the phone until you obtain the desired volume level.
USING REDIAL
You can quickly dial the last num- ber you dialed. Press TALK, listen for the dial tone, then press
REDIAL/PAUSE.
The redial memory can also store tone entries (see “Using Tone Services on a Pulse Line” on Page 11) and pause entries (see “Entering a Pause”).
ENTERING A PAUSE
In some telephone systems, you must dial an access code (9, for example) and wait for a second dial tone before you can dial an outside number. You should also store a pause after the access code to allow the outside line time to connect when you redial the number. To enter a
pause, press REDIAL/PAUSE. Re- peatedly press REDIAL/PAUSE for a longer pause.
Note: – appears when you press
PAUSE.
USING FLASH
Flash performs the electronic equivalent of a switchhook opera- tion for special services, such as Call Waiting.
For example, if you have Call Waiting, press
to answer an incoming call with- out disconnecting the current call. Press CALL BACK/FLASH again to return to the first call.
Note: If you do not have any spe- cial phone services, pressing CALL BACK/FLASH might discon- nect the current call.
USING MUTE
Press MUTE to talk to someone else in the room without the per- son on the other end of the phone line hearing your conversation. MUTE appears. Press MUTE again to resume your phone conversa- tion.
10 | Phone Operation |
