Radio Shack HandsfreePhone withCallerID/CallWaiting Phone Operation, Setting the Ringer Volume

and press #.

RINGER H/L

Leave PULSE/TONE set to TONE. If the dial tone contin- ues, you have pulse service. Set PULSE/TONE to PULSE.

5. Press TALK to hang up.

SETTING THE RINGER VOLUME

You can select one of two volume

settings. Seton the top of the phone to the desired ringer setting (high or low).

STORING YOUR AREA CODE

You can store your local area code in the phone’s Caller ID memory so it does not store the area code if the received call is from your local area. If for some reason you need to dial the area

code (or store it in the memory), you can add it afterwards. See “Dialing Numbers from a Caller ID Record” on Page 13.

Note: If your calling area requires 10-digit dialing including area code, do not enter the area code but leave this option blank.

Follow these steps to store your area code.

1.Hold down CALL BACK/FLASH

for about 4 seconds.

2.Enter your three-digit area code. If you make a mistake, press REDIAL/PAUSE to clear the entry, then enter the cor- rect code.

3.Press CALL BACK/FLASH to store the area code.

ˆPhone Operation

Before you use the phone, put on the headset and adjust it as need- ed.

MAKING AND RECEIVING CALLS

To make a call, press TALK. TALK appears. Listen for the dial tone,

then dial the number. The number appears on the display as you dial it.

Note: o appears when you press H appears when you

Phone Operation 9