PROGRAMMING MACROS
Your remote has four macro keys (MUSIC, MOVIES, SPORTS, and NEWS) that store up to three channels per macro key for instant tuning of TV or cable/satellite channels. For example, if your favorite sports channel on your cable service is 061, you can store it as an in- stant
Follow these steps to program macros.
1.Hold down P until the red light blinks twice.
2.Press 9 9 5. The red light blinks twice.
3.Press the desired macro key (MUSIC, MOVIES,
SPORTS, or NEWS).
4.Press CBL/SAT or TV to select a device.
5.Press the numbers for the desired channel (0 6 1 for the sports channel in the previous example).
6.Hold down P until the red light blinks twice.
Note: If your original remote control requires you to press Enter or Select to send a command, press Enter or Select after entering your channel number. Then, hold down P until the red light blinks twice.
If you want to add two more channels to the macro keys, repeat Steps
Note: You can only program three channels for each macro key. Programming more than three channels will overwrite one or more of your original channel set- tings.
PROGRAMMING THE POWER KEY
Your remote can store a power on/off sequence to control the power of up to six devices with a single key press. Once the desired sequence is stored, POWER acts as a master power key when held down for at least 2 seconds.
12Preparation
