Paxar Monarch 9476 manual 1-21, Assembling the Station

Chapter 1. Assembling the Station

7.Position the charger between the retainer rods so the back of the charger rests against the metal L-bracket. The status lights on the front of the charger should face out. (Figure 15.)

8.Place the rubber bracket across the top of the charger. Use 1/4"-20 wing nuts, washers, and lockwashers to attach the retainer rods to the rubber bracket as shown. Tighten both wing nuts equally to secure the charger. (Figure 15.)

Rubber

Bracket

Retainer

Rod

External Power

Socket

Figure 15

9.Plug the charger’s power cord into the power outlet on the inside wall of the cabinet.

1-21