Chapter 2. Loading Supplies
Reloading a Ribbon Cassette ------------------------------------------------------------------
To reload your ribbon cassette, remove the ribbon cassette from the printer and follow these steps:
1.Locate the end of the cassette with the two latches.
nLocate the International Symbols for opening and closing.
( 
) indicates the cassette is locked (closed). ( 
) indicates the cassette is unlocked (open).
2.Rotate both latches until they snap into the unlocked position.
3.Lift off the half of the cassette without the latches and set it aside. (Figure 36.)
Ridged End of
Ribbon
Spool
Foam
Washer
Latch
Gear | Latch |
Figure 36
