Paxar Monarch 9476 manual Loading Supplies, Supply Strip Fan-Fold Slot Magnetic Supply Bracket

Chapter 2. Loading Supplies

6.Fan all four sides of the supply stack and straighten any curved or bent corners. This will prevent supplies from sticking together and causing feed jams.

7.Place the supply stack on the bottom shelf, directly beneath one of the Station’s fan-fold slots. The supply’s liner side should face up, so the arrow next to the black mark points toward the printer. Place the magnetic supply brackets at the opposite corners of the stack as shown. (Figure 26.)

Supply

Strip

Fan-Fold

Slot

Magnetic Supply

Bracket

Figure 26

8.Lift the supply strip up through the Station’s fan-fold slot. (Figure 26.)

2-5