9476 Assembly and Setup Instructions
3.On a firm surface, using a piece of cardboard for a pad, stand the axle on one end. Hammer an end cap onto the axle. The end cap should lock firmly.
4.Slide the following parts, in this order, onto the axle: one wheel, one washer, and two axle mounts. (Figure 1.)
Washer
Axle
Mount
Washer end cap
Wheel
Axle
Figure 1
nDo Not install the second end cap without first inserting the axle mounts into the sockets. The sockets prevent the axles from being positioned too close together.
