Paxar Monarch 9476 manual Attaching the Wheels and Casters, Tools You Need

Chapter 1. Assembling the Station

Tools You Need--------------------------------------------------------------------------------------------

To assemble the Station, you need:

Fflathead (common) screwdriver

FPhillips screwdriver

Fwrenches: 7/16", 11/32", 1/4" and adjustable

Frubber mallet

Fslip-joint pliers

Fneedle-nose pliers

Fhammer

Step 1: Attaching the Wheels and Casters --------------------------------------------

1.Remove the following items from their packaging: F (2) 8" wheels

F (2) 4" casters with brakes F (2) axle mounts

F (2) axle end caps F (2) large washers F (1) axle

w

To avoid hitting your fingers, use needle-nose pliers to hold the end cap as you are hammering it onto the axle.

2.You may need an assistant for this step. Remove the collapsed Station assembly from the carton. Hold the top piece of packaging against the top of the Station and turn the Station upside down on a firm surface. The top packaging serves as a pad to protect the printer power packs, which are attached to the top of the Station.

cMake sure the printer power packs attached to the top of the Station are not crushed during the next three steps.

1-3