9476 Assembly and Setup Instructions
3.Place the battery on the cabinet floor. Remove the cardboard packaging. Use a 15mm bolt, washer, lockwasher, and M5 nut to attach the white battery wire to the positive (+) battery post. (Figure 11.)
| Negative |
Green | Positive (+) |
Ground |
|
Wire |
|
Black
Wires
White
Wire
Figure 11
4.Slide the battery to the back of the cabinet.
5.Use a 15mm bolt, washer, lockwasher, and M5 nut to attach the two black wires and green (ground) wire to the negative
6.Position the battery between the retainer rods. The writing on the battery should face out. (Figure 12.)
