Paxar Monarch 9476 manual Adjusting the Station’s Height, Assembly and Setup Instructions

9476 Assembly and Setup Instructions

Step 2: Adjusting the Station’s Height--------------------------------------------------

1.Remove the following items from their packaging: F (4) 1/4"-20 x 3/4" bolts (black)

F (4) 1/4"-20 wing nuts (black)

F (1) plastic cable-tube clamp (may already be attached to the cable tube)

2.Turn the Station right side up.

3.Open the Station’s cabinet and remove the packaging from around the bottom of the cable tube and from the cables.

4.You might need another person’s help with this step. Lift the top shelf to the second-highest height adjustment. Make sure the cables inside the cable tube feed freely as you lift the top shelf. Insert bolts into the holes in all four legs and fasten them with wing nuts as shown. (Figure 3.)

Cable

Tube

Cable

Clamp

Figure 3

1-6