Paxar Monarch 9476 manual Assembly and Setup Instructions

9476 Assembly and Setup Instructions

2.Center a strip of supply over the supply deflector. The supply deflector’s rubber O-rings must be positioned inside the edges of the supply. (Figure 25.) If you do not need to adjust the position of the O-rings, skip to step 6.

3.Lift one end of the supply deflector to remove it from the supply well. You may have to gently spread the supply holders apart to release the supply deflector. (Figure 25.)

Supply

Deflector

O-Ring

Figure 25

4.Roll the O-rings out of their tracks and into the new positions.

5.Replace the supply deflector in the supply well. (Figure 25.)

2-4