9476 Assembly and Setup Instructions
Important Charging Information ----------------------------------------------------------
w
DANGER! RISK OF ELECTRICAL AND FIRE HAZARD.
CERTAIN ACTIONS MAY RESULT IN DEATH, SERIOUS
INJURY, SHOCK, OR BURNS.
FDo Not disassemble the battery charger; take it to an authorized repair center for repair or service.
FDo Not operate the Station while the battery charger is charging.
FDo Not expose the battery charger to rain or snow. Never charge a frozen battery.
FPlug only into a grounded outlet with three holes. Do Not alter the AC power cord or plug provided. Do Not operate the battery charger with a damaged cord or plug.
FDo Not let the battery remain fully or partly discharged for a long time; keep it charged.
FIf using an extension cord, you must use #18 or heavier for lengths up to 50 feet, or #16 or heavier for lengths up to 100 feet. Use of improper extension cord could cause fire and electric shock.
FPull on the plug rather than the cord when disconnecting the battery charger. Locate the cords where they will not be stepped on, tripped over, or otherwise subjected to damage or stress.
FThe battery must be charged when the voltage is 10.5V or less. Print a test label to determine the voltage. The charger will not charge if the voltage is less than 3 volts. Call Technical Support for information about charging a "deeply discharged" battery.
