![](/images/new-backgrounds/1119862/11986237x1.webp)
11.Use the provided LED lens cleaner. Gently wipe the LED.
12.Close and latch the top cover.
Replace the Fuser
WARNING!
If the printer has been powered on, the fuser is HOT. This area is clearly labeled. Do not touch it. Handle the fuser with extreme care. Hold it only by its handle, which is only mildly warm to the touch.
If in doubt, switch the printer off. Wait at least 10 minutes for the fuser to cool before opening the printer cover.
1.Press the cover release and open the top cover.
18