WIRELESS TRANSMITTER
WIRELESS TRANSMITTER
6.35PLUG
3
Push the battery cover in the front of the bodypack as per the sketch map; install the provided 9 volt battery, taking care to fit it with the correct polarity connected.
Switch on the bodypack transmitter. The red LED will come on for one second and then go off. This indicates correct operation.
If the red LED stays ON or is dim, this indicates the battery is low and should be changed. If the red LED does not come on at all, it indicates the battery is dead, and you should change the battery.
Adjust the volume control on bodypack until you get sufficient sound from your speaker.
GUITAR AMPLIFIER
Refer to the installation diagram below.
GUITAR
Using the supplied audio cable, connect from the AF OUT jack socket to the GUITAR INPUT socket on your guitar amplifier. Connect the mains power adaptor from "DC 12V" jack to a suitable mains power socket.
4
