Radio Shack PRO-2052 Scanning the Scan Lists, Automatically Storing an ID in a Scan List Location

Automatically Storing an ID in a Scan List Location

To store an ID in the first available scan list location during a search, press E at any time after the scanner stops on that ID.

Or, follow these steps to store an ID in a specific scan list location.

1.Press PRIORITY when the desired ID appears.

2.Repeatedly press ▲ or ▼ to choose a specific scan list loca- tion.

3.Press E.

Note: An ID you enter into a scan list location automatically overwrites any ID that is already stored in that loca- tion.

To display a scan list location and store an ID in that location during a search, press PRIORITY to display the current scan list location, then press E when your scanner stops on an ID you want to store.

SCANNING THE SCAN LISTS

Press SCAN to begin scanning the lists you have programmed. Id SCAN scrolls on the display.

Note: If more than one of the scan IDs you have stored do not work, Error flashes twice and the scanner beeps several times, then the scan list num- bers appear at the top of the display.

To remove a scan list from active scanning, use the number keys to en- ter the scan list’s number. The scan list indicator turns off, and the IDs in that list are not scanned.

Note: You cannot remove all the scan lists. One scan list must always be ac- tive.

To restore a scan list to active scan- ning, use the number keys to enter its number again.

Press SEARCH to return to the previ- ously selected function.

Deleting a Stored ID

1.Press MANUAL.

2.Repeatedly press ▲ or ▼ to select the scan list location (shown at the top of the display) you want to delete.

3.Press 0 then E.

Priority ID Scanning

As in conventional scanning, you can designate one ID in each scan list as a priority ID.

To select an ID as a priority ID, hold down PRIORITY for about 2 seconds when the scanner stops on the ID. P appears.

39