21
STORING FREQUENCIES INTO CHANNELS
1. When the scanner displays a fre-
quency you want to store while
scanning the banks or searching
the search bands, press PROG.

CH flashes, and HOLD and the fre-

quency number appear.
2. Press PRIVATE, POLICE, or FIRE/
EMG to store the frequency into a
channel. For example, if you want
to store the frequency in one of
the channels in the POLICE ser-
vice search bank, press POLICE.
If the search bank you selected
has an empty channel, the fre-
quency number flashes alternately
with the lowest empty channel
number and 000.0000. If the
search bank you selected has no
empty channels, the frequency
number flashes alternately with
the channel number of the last
channel where you stored a fre-
quency.
Note: If you press a service
search bank key other than PRI-
VATE, POLICE, or FIRE/EMG, the
scanner beeps several times and
Error appears. If you are scan-
ning the banks, press PRIVATE,
POLICE, or FIRE/EMG, then start
again from Step 1. If you are
searching the search bands,
press
SEARCH then start again
from Step 1.
3. Press PROG to store the fre-
quency in the displayed channel.
Or, repeatedly press s or t, select
a channel number, then press
PROG. The scanner displays the
channel number where you stored
the frequency.
Note: If you select a channel with
a frequency already stored in it,
the scanner replaces the fre-
quency with the new one.
To cancel storing the frequency,
press
BAND.
4. Repe at Steps 1–3 to store more
frequencies into channels.
5. When you finish storing frequen-
cies, set MEMOLOCK OFF/ON to
ON to prevent accidentally chang-
ing them (see “Using Memolock”
on Page 23).
20-147.fm Page 21 Tuesday, Augus t 3, 19 99 3:23 PM