22
CLEARING FREQUENCIES FROM CHANNELS
You can clear a frequency from a
channel by storing an empty frequen-
cy in its place.
Notes:
• You cannot clear or change any of
the frequencies in the scanner’s
search bands, any of the scan-
ner’s preset weather frequencies,
or the preset frequencies in the
service search banks.
• When you c lear a channel, the
scanner automatically locks out
the channel (see “Locking Out
Channels and Frequencies” on
Page 23).
1. Be sure MEMOLOCK OFF/ON is
set to OFF (see “Using Memolock”
on Page 23).
2. Press SEARCH, then repeatedly
press BAND to select a search
band.
SRCH and the search band
range for each band appear.
3. Press HOLD when the scanner
starts automatically searching that
band. HOLD appears.
4. Press PROG. CH flashes.
5. Press s or t until 000.0000
appears.
6. Press PRIVATE, POLICE, or FIRE/
EMG to select the bank that con-
tains the channel you want to
clear.
HOLD and PRIVATE, POLICE,
or FIRE/EMG a ppears, and a
channel number flashes.
7. Repeatedly press s or t until the
scanner displays the channel you
want to clear. 000.0000 flashes
alternately with the channel num-
ber and the frequency number.
8. Press PROG to store the empty
frequency. The channel number
and
000.0000 appear.
To cancel clearing the channel,
press
BAND.
9. Repeat Steps 2–8 to clear more
channels.
10. When you finish clearing chan-
nels, set MEMOLOCK OFF/ON to
ON
to prevent accidentally chang-
ing them (see “Using Memolock”
on Page 23).
20-147.fm Page 22 Tuesday, Augus t 3, 19 99 3:23 PM