20-508.fm Page 23 Wednesday, August 4, 1999 1:50 PM

3.To change the search direction, press t to search downward or s to search upward. b, SRCH, and t or s appear on the display.

4.When the scanner stops on an active frequency, you can do one of the following:

To store the displayed frequency into the monitor memory, press MON/0. MON appears on the display.

To continue the search, press t or s.

To hold the frequency, press HOLD/BAND. H appears on the display. To continue the search, press and hold t or s for about 1 second. H disappears from the display. The scanner briefly dis- plays the frequency band, then resumes scanning where you stopped.

Notes:

If you want to step through the frequencies while H is displayed, press t or s.

If you tune to a search skip frequency, L appears on the display. See “Search Skip Memory.”

If you want to change the frequency band, repeatedly press HOLD/BAND. The selected frequency band is displayed.

Direct Search

You can search up or down for more frequencies from the currently dis- played frequency.

1.Press MANUAL.

2.Use the number keys and CLEAR/. to enter the frequency (includ- ing the decimal point) you want to start the search from, or enter the channel number containing the starting frequency.

3.Press t to search downward or s to search upward from the selected frequency. d, SRCH, and t or s appear on the display.

4.When the scanner stops on a transmission, you can do one of the following:

To store the displayed frequency into the monitor memory, press MON/0. MON appears on the display.

To continue the search, press t or s.

23

Page 23
Image 23
Radio Shack PRO-28 owner manual Direct Search