Radio Shack PRO-28 owner manual Search Skip Memory

20-508.fm Page 24 Wednesday, August 4, 1999 1:50 PM

•To hold the frequency, press HOLD/BAND. h appears on the dis- play. To continue the search, press and hold t or s for about 1 second.

Notes:

•If you want to step through the frequencies while h is displayed, press t or s.

• If you tune to a search skip frequency, L appears on the dis- play (see “Search Skip Memory”).

•If you press HOLD/BAND, the scanner restarts as a band search. b, SRCH, and t or s appear on the display.

Search Skip Memory

You can skip up to 20 specified frequencies during a band or direct search. This lets you avoid unwanted frequencies or ones you have al- ready stored in a channel.

To skip a frequency, press L-OUT/S/Swhen the scanner stops on the fre- quency during a band or direct search. The scanner stores the frequen- cy in memory and resumes the search.

To clear a single frequency from skip memory so the scanner can stop on it during a band or direct search, press HOLD/BAND to hold the search, press t or s to select the frequency, then press L-OUT/S/Suntil L disappears from the display.

To clear all the skip frequencies at once, while in the search mode, press HOLD/BAND, then press and hold L-OUT/S/Suntil the scanner beeps twice (about 3 seconds).

Notes:

•If you program more than 20 frequencies to skip, each new fre- quency replaces ones you stored earlier, starting from the first stored frequency.

•You can select the skipped frequency when the scanner is in the hold mode. The scanner displays L when you select a skipped fre- quency.

24