Erasing Tapes

To record over a cassette tape, simply record as usual. The cassette deck records over the previous recording.

You can quickly erase both sides of a cassette tape using a RadioShack bulk tape eraser.

Note: If you use metal or high-bias type tape, the recorded sound might not be erased prop- erly.

Preventing Accidental Erasure

Cassette tapes have two erase-protection tabs — one for each side. When a tab is in place, you can record on that side.

To prevent accidental erasure of a tape re- cording, use a screwdriver to remove one or both of the cassette tape’s erase-protection tabs. This prevents RECORD from being pressed.

If you later decide to record on a tape side af- ter you have removed the erase-protection tab, place a piece of strong plastic tape over that side’s erase-protection hole. Be sure you cover only the hole originally covered by the erase-protection tab.

Caution: Removing the erase-protection tabs does not prevent a bulk eraser from erasing a cassette tape.

Cleaning the Tape-Handling Parts

Dirt, dust, or particles of the tape’s coating can accumulate on the tape heads and other parts that the tape touches. This can greatly reduce the performance of the cassette player. After every 20 hours of tape player operation, follow these steps to clean the tape-handling parts or use a RadioShack cassette deck cleaning kit.

1.Remove the batteries and disconnect any other power source.

2.Set FUNCTION to TAPE.

3.Open the cassette compartment door and press PLAY to expose the tape-handling parts.

4.Hold down the erase-protection tab sen- sor, then press RECORD to expose the record/playback and erase heads.

Erase-Protection Tab Sensor

5.Use a cotton swab dipped in tape head cleaning solution or denatured alcohol to gently clean the capstans, pinch roller, tape guides, and tape heads.

Capstan Record/Playback

Head

Pinch

Erase

Roller

Head

 

Tape Guides

6.Press STOP/EJECT and close the cas- sette compartment door, then reinstall the batteries or reconnect the power source.

5

Page 5 Page 7
Page 6
Image 6
Radio Shack SCR-64 specifications Erasing Tapes, Preventing Accidental Erasure, Cleaning the Tape-Handling Parts
Page 5 Page 7

SCR-64 specifications

The Radio Shack SCR-64 was a compact and versatile shortwave radio receiver that gained popularity among enthusiasts during the late 1970s and early 1980s. It was well-regarded for its portability, ease of use, and robust performance, making it an ideal choice for both novice and experienced users interested in exploring the shortwave spectrum.

One of the standout features of the SCR-64 was its broad frequency coverage. It was capable of receiving signals across several frequency bands, typically ranging from 1.6 MHz to 30 MHz, enabling users to tune into a diverse array of stations broadcasting from around the world. This wide range of capabilities made the SCR-64 an excellent tool for listening to international news, amateur radio, and various cultural programs.

The SCR-64 incorporated analog tuning, allowing users to manually select frequencies using a dial. While some modern radios have shifted towards digital displays, the analog dial found on the SCR-64 offered a tactile experience that many old-school radio enthusiasts appreciated. The design facilitated precision tuning, allowing users to fine-tune the reception of distant signals with ease.

Additionally, the SCR-64 boasted a built-in telescopic antenna that significantly improved signal reception. This portable feature ensured that users could easily adjust the antenna's length and angle for optimal listening, particularly in areas with high levels of radio interference. An external antenna jack was also available, enabling enthusiasts to connect more powerful antennas for enhanced reception capabilities.

The radio's user-friendly layout included a simple control panel with clear labeling for volume and tone adjustments. It prioritized an intuitive experience, allowing users to focus on the excitement of discovering new broadcasts rather than getting bogged down by complicated settings.

Powering the SCR-64 was another practical consideration. It operated on regular batteries, making it easily usable in remote locations without access to electrical outlets. Its lightweight design further contributed to its portability, making it a popular choice for travelers and outdoor enthusiasts.

In summary, the Radio Shack SCR-64 was a well-balanced shortwave receiver with impressive features for its time. Its broad frequency range, analog tuning, built-in antenna, and portability made it a cherished option for anyone interested in the world of radio communication. Though technology has advanced significantly since its release, the SCR-64 remains a nostalgic symbol of radio listening culture, continuing to spark interest among collectors and vintage radio aficionados today.
Top Page Image Contents