Radio Shack SCR-64 Using The Radio, Loading A Cassette Tape, Adjust VOLUME as desired

PHONES — connect a pair of headphones (not supplied) with

a1/8-inch (3.5-mm) plug. Your lo- cal RadioShack store carries a wide selection of headphones.

Insert the headphones’ 1/8-inch (3.5-mm) plug into the cassette recorder’s PHONES jack.

Note: Connecting headphones automatically disconnects the built-in speaker.

TONE HIGH/LOW — slide TONE to high to enhance the treble sound or to LOW to enhance the bass sound.

FUNCTION RADIO OFF/TAPE/RADIO — slide to turn the radio on and off and to use the cassette functions.

PLAY

BAND AM/FM/FM STEREO — slide to se- lect the band. Select FM STEREO to hear sound in stereo. If the reception using FM STEREO is weak, select FM instead. The sound will be monaural, but the reception should improve.

TUNING — rotate to select the desired AM or FM station.

Antenna — to get the best FM re- ception, fully extend the telescoping antenna.

The AM antenna is built-in. For the best AM reception, rotate the radio.

VOLUME — rotate to adjust the sound volume.

The radio/cassette player’s automatic level control circuitry automatically adjusts the recording level.

Adjusting VOLUME does not affect the recording.

PAUSE — press to temporarily stop a tape. Press again to resume play, recording, rewind- ing, or fast-forwarding.

STOP/EJECT — press to stop tape play, recording, fast-forwarding, or rewinding, or to open the cassette com- partment door.

Note: The radio/cassette player’s auto stop function saves battery life by turning off the motor and releasing the tape-handling parts when the tape reaches its end.

RECORD — press to record from the radio or live, using the built-in MIC.

Note: Sometimes taped AM broadcasts produce a whis- tling sound that you can hear, called a “beat.” Slide BEAT CUT (on the back of the radio/cassette player) to the position that produces the best quality recording.

REWIND — press to rewind a tape to the desired location.

FAST-F— press to fast-forward a tape to the desired location.

USING THE RADIO

1.Set FUNCTION to RADIO to turn on the radio.

2.Set BAND to the desired setting (AM, FM, or FM STEREO).

3.Adjust VOLUME as desired.

4.Rotate TUNING to select a radio station.

5.When finished, set FUNCTION to TAPE to turn off the radio.

LOADING A CASSETTE TAPE

1.Take up any slack in the tape by turning the cassette’s hub with a pencil or your finger. If you do not remove excess slack, the tape might become tangled in the record/playback mechanism. Avoid touching the tape.

2.Press STOP/EJECT to open the cassette compartment door.

3