Connecting to an Audio Source

You can connect the transmitter to your audio source's left and right audio output jacks or its headphone jack.

Cautions:

•Do not connect the transmitter to your audio source's speaker output. Doing so could damage the transmitter and the audio source.

•If you connected the transmitter to an audio source's headphone jack, set the audio source's volume control to its middle-position.

1.Connect one end of the supplied audio patch cord to the transmitter's audio jacks (white plug to L AUDIO IN and red plug to R AUDIO IN).

2.If you are using the audio source's output jacks, connect the white and red plugs at the other end of the patch cord directly to the audio source's corresponding left (white) and right (red) audio jacks.

If you are using your audio source's stereo headphone jack, connect the patch cord's white and red plugs to the white and red phono jacks on the phono side of the 1/8-inch supplied adapter.

If your audio source has a 1/8-inch headphone jack, insert the adapter's 1/8- inch stereo plug into the audio source's HEADPHONE jack.

Mode Switch

For normal stereo use, set STEREO/MONO, on the back of the transmitter, to STEREO. If you are using a monaural system, set STEREO/MONO to MONO.

3