Radio Shack Speaker Connecting AC Power, Mounting the Speakers

1.Insert the supplied 12V, 1800mA AC adapter’s barrel plug into the DC 12V jack located at the back of the speaker.

2.Plug the other end of the AC Adapter into an AC wall outlet.

3.Route the adapter’s cord through the strain relief slot on the back of the speaker.

Repeat the above steps for the other speaker.

To mount a speaker on the wall, you need a screw (not supplied) with a head that fits into the keyhole slot on the back of the speaker.

1.Select a location and drill a hole at the location.

2.Thread a screw into the hole until the screw’s head extends about 15mm from the wall.

3.Align the keyhole on the speaker with the screw head in the wall, then slide the speaker downward to secure it.