Installing a Speaker

Connecting Power

Keyhole Slot

Battery

Compartment

Cover

Strain Relief

Slot

1.Press the two tabs located on the back of the speaker and open the battery compartment cover.

2.Insert the batteries in the compartment according to the polarity symbols (+ and –) marked inside the battery compartment.

8 D Size Batteries

Installing Batteries

You can use 16 (8 for each speaker) D size batteries (not supplied) to power the speakers. Batteries are available at your local RadioShack store or online at www.radioshack.com.

Battery Notes:

•Use only fresh batteries of the required size and recommended type.

•Do not mix old and new batteries, different types of batteries (standard, alkaline, or rechargeable), or rechargeable batteries of different capacities.

•If you do not plan to use the speakers for a week or longer, remove the batteries. Batteries can leak chemicals that can destroy electronic parts.

•Dispose of old batteries promptly and properly.

•Do not burn or bury batteries.

Battery

Compartment

Cover

3.Replace the battery compartment cover and make sure the cover is secured prior to moving the speaker.

Notes

•Unpluging the supplied AC adapter causes the batteries to automatically power the speaker.

•When the AC adapter is used, the batteries are automatically disconnected from the speaker.

•When the speakers POWER LED blinks, replace the batteries.

4