Radio Shack STAV-3780 owner manual TV and Catv Operation, Satellite Receiver Operation

TV

Using the Remote Control

TV and CATV Operation

Note: You must have programmed the code for your TV or CATV into the remote control for these functions to work.

Before operation, press TV (or the one connected to your TV or CATV) to select TV/CATV operation.

POWER

CHANNEL

TV FUNC (TV only)

TV VOL

Number Buttons

Turns on/off the TV or CATV.

Press to change the tuner channel.

Selects the TV’s input mode, antenna or line input.

Adjusts the volume.

Selects channel directly. On some TVs, you might need to press DISC after entering the channel number.

CONTROL

MODE

On some models, the functions of the buttons are different.

POWER	Turns the power on/off.
	Moves cursor left.( )
	Moves cursor up.(▲)
TV/	Moves cursor right. ( )
CATV/	Moves cursor down. (▼)
SAT	Decreases volume.
	Increases volume.
	Selects the TV’s input mode, antenna or line input.
	ENTER - enters the selected cursor position.
Number Buttons	Selects channel directly.
DISC	Turns the menu on/off.

Satellite Receiver Operation

Note: You must have programmed the code for your SAT receiver to the remote control for these functions to work.

Before operation, press TV (or the one that you connected to your SAT receiver) to select SAT receiver operation.

POWER	Turns the power on.
	Moves cursor left.( )
	Moves cursor up.(▲)
	Moves cursor right. ( )
	Moves cursor down. (▼)
Turns the power off.
	ENTER - enters the selected cursor position.
Number Buttons	Selects channel directly.
DISC	Turns the menu on/off.

33