Radio Shack STAV-3780 owner manual LD Player Operation, VCR Operation

Using the Remote Control

CONTROL

MODE

LD Player

LD Buttons

LD Player Operation

Note: You must have programmed the code for your LD player into the remote control for these functions to work.

Before operation, press LD (or the one connected to your LD player) to select LD player operation.

POWER		Turns the LD player on and off.
	/	Returns to the beginning of the current chapter/track or advances
		to the next chapter/track.
/		Rapidly advances backward/forward within a chapter/track.
		Press to pause play. Press again to resume. On some LD play-
		ers, press to pause the playback so you can view a single frame
		(freeze-frame operation).
		Stops playback.
		Plays the disc.
Number Buttons		Selects chapter/track.
+10		Enters 10 of the track number. For example, to enter track 15,
		press +10 then 5 (might not work with some LD players).
DISC		Selects the side of a disc.

CONTROL

MODE

VCR

Buttons

VCR

VCR Operation

Note: You must have programmed the code for your VCR into the remote control for these functions to work.

Before operation, press VCR (or the one connected to your VCR) to select VCR operation.

POWER		Turns on/off the VCR.
	CHANNEL	Press to change the VCR’s tuner channel.
		Press to switch the VCR antenna output, VCR’s tuner output or
		direct signal from antenna to use TV’s tuner.
/		Quickly locates and plays the beginning of recorded material dur-
		ing play.
		Or, when the tape is stopped, rapidly searches forward or back-
		ward to locate a specific section of the tape.
		Press to temporarily stop playback/recording. Press again to re-
		sume. On some VCRs, press to pause the playback so you can
		view a single frame (freeze-frame operation).
	(DISC)	Stops playback/recording.
		Press to start normal playback.
Number Buttons		Selects channel directly (might not work with some VCRs).
+10		With some VCRs, you might need to press this to enter the chan-
		nel you selected with number buttons.

32