Wildview Series
o3P: Three images continuous capturing per PIR triggering
o AVI: 10 second video clip per PIR triggering
•FULL: When memory capacity is full, this front LCD screen will show “FULL”
Programming your Wildview Camera
The following setting must be performed before you turn on the camera.
1.Select the time out interval by sliding the time out toggle switch to the desired preset time interval in minutes. 1 / 5 / 10 / 20 minutes.
2.Select the resolution setting by sliding the resolution toggle switch to the desired resolution setting. Hi / Lo resolution.
3.Select the Flash mode: Slide the switch to either Auto / On / Off position.
a. Auto – Flash on based on surround light
www.wildviewcam.com | Toll Free | 11 |
