Radio Shack TAD-1026 owner manual Telephone Operation, Using Redial, Setting the Handset Volume

43-786.fm Page 13 Monday, August 16, 1999 8:02 AM

TELEPHONE OPERATION

Place and answer phone calls on the TAD-1026 as you would with any other phone. Read this section to learn about the phone’s special features.

USING REDIAL

You can quickly dial the last number di- aled. When you hear a dial tone, simply press REDIAL.

SETTING THE HANDSET VOLUME

The handset’s volume control lets you adjust the sound you hear through the handset. This is especially helpful for persons who are hearing impaired or for poor phone lines or noisy areas.

To increase the handset’s volume, set RECEIVER VOL to HI. If the volume is too loud, set RECEIVER VOL to LOW.

Notes:

•The redial memory holds up to 32 digits, so you can easily redial long distance as well as local numbers.

•The redial memory does not store a FLASH entry or any keys you press after FLASH (see “Using Flash”).

Note: To adjust the speaker volume, see “Screening Calls” on Page 21.

13