Radio Shack TAD-1026 owner manual Setting the Number of Rings

Models: TAD-1026

1 32
Download 32 pages 12.5 Kb
Page 19
Image 19

43-786.fm Page 19 Monday, August 16, 1999 8:02 AM

Important: Do not tell callers that you are not home. Instead, say that you cannot come to the phone right now.

3.When you finish recording, press STOP/T-SET.The TAD automatically plays back the outgoing message.

To play back your outgoing OGM1 mes- sage at any time, press OGM1. A1 ap- pears, the TAD beeps, and the outgoing message plays.

To play back your OGM2 message at any time, press OGM2, A2 appears, the TAD beeps, and the announcement-only message plays.

SETTING THE NUMBER OF RINGS

The ring select switch on the back of the TAD controls how long the TAD waits before it answers a call. Slide the switch to the appropriate position.

2 — The TAD answers after two rings.

4 — The TAD answers after four rings.

7 — The TAD answers after seven rings.

T.S. (Toll Saver) — If there are new mes- sages, the TAD answers after two rings. Otherwise, the TAD answers after four rings. This lets you avoid unnecessary charges when calling by long-distance to check your messages. If you hear more than two rings, you know you can hang up because the TAD has no new mes- sages.

19

Page 19
Image 19
Radio Shack TAD-1026 owner manual Setting the Number of Rings