Radio Shack TAD-779 Illus. showing Clock button, Illus. showing OGM/REPEAT and PLAY/SKIP

43-779.fm Page 8 Monday, August 16, 1999 7:34 AM

Follow these steps so the TAD can record the correct day and time each message and memo is recorded.

Note: If you do not complete each step within 8 seconds, the TAD-779 sounds three beeps and exits from setup. Start again at Step 1.

1.Use a pointed object such as a straightened paper clip to hold down CLOCK until the TAD-779 beeps and announces the currently set day.

Illus. showing CLOCK button.

2.To change the day of the week, repeatedly press REPEAT to move backward or SKIP to move forward until the TAD announces the desired day of the week.

Illus. showing OGM/REPEAT and PLAY/SKIP.

8

3.Press STOP. The TAD-779 beeps and announces the hour.

Illus. showing ANSWER/

STOP/DELETE.

4.To change the hour, repeatedly press REPEAT or SKIP.

5.Press STOP. The TAD-779 beeps and announces the minutes.

6.To change the minutes, repeatedly press REPEAT or SKIP.

Note: To change the time in 10- minute increments, hold down

REPEAT or SKIP.

7.Press STOP to confirm the settings. The TAD beeps and announces the day and time.

To check the current day and time at any time, use a pointed object such as a straightened paper clip to press CLOCK.