
Memos are stored with incoming mes- sages and are replayed the same way (see “Playing Messages”).
Follow these steps to record a memo.
1.Hold down PLAY until the TAD beeps.
2.Speak your memo from about 8 inches in front of the TAD.
3.When you finish, press STOP. The TAD beeps and is ready to answer messages.
CHANGING THE REMOTE OPERATION SECURITY CODE
The TAD’s remote operation security code is preset to 779. Follow these steps to change it to a number from 000 to 999.
Notes:
•Be sure to complete each step within 8 seconds. Otherwise, the TAD sounds three beeps and exits. Start over at Step 1.
•If AC power fails or if the backup battery becomes weak, the remote operation security code automati- cally resets to 779.
1.Use a pointed object, such as a straightened paper clip, to hold down CODE until the
Illus. showing
CODE switch.
2.Repeatedly press SKIP or REPEAT to set the first digit, then press STOP. The TAD beeps and announces the second digit.
3.Repeatedly press SKIP or REPEAT to set the second digit, then press STOP. The TAD beeps and announces the third digit.
4.Repeatedly press SKIP or REPEAT to set the third digit, then press STOP. The TAD beeps once and announces the complete remote operation security code.
To check the remote operation security code at any time, press CODE. The TAD announces the currently set security code.
12