Radio Shack TRC-237 owner manual Connecting Antenna

21-1650.fm Page 15 Thursday, August 5, 1999 11:43 AM

Note: If the TRC-237 does not operate when you use the DC fused cord, turn the power supply off, unplug the cord from the power supply’s power socket, then clean any debris from the socket. If your TRC- 237 still does not work, check the fuse in the DC fused cord and replace it if neces- sary.

CONNECTING THE

ANTENNA

Caution: To prevent damage to your TRC-237, you must connect an antenna before you operate it.

Follow these steps to attach the supplied flexible antenna to your TRC-237.

1.Align the slots around the antenna’s connector with the tabs on the antenna jack on top of the TRC-237.

2.Press the antenna down over the jack and turn the antenna’s base clockwise until it locks into place.

To remove the antenna, turn the anten- na’s base counterclockwise until it un- locks, then lift it off the antenna jack.

15