Removiing the MOBILINK
Always take care when removing the MOBILINK from the slot. PCMCIA slots are designed to tightly hold the card into place. There are usually ejector buttons on one end of the slot. Before attempting to remove the card, follow these important steps:
1. Press the ejector button. Pressing the button causes the unit to unplug from the internal connector, and to partially slide out of the slot.
2.Once the card has moved slightly
outward, grasp the MOBILINK on | Figure 4: Ejecting the MOBILINK from the Slot |
each side, at the hinge, and then |
|
pull the card free from the slot. |
|
3. Fold down the transmitter for |
|
storage. |
|
| Page 8 | © 1999 RadioLAN. All rights reserved. |
