The Ramsey Kit Warranty

Please read carefully BEFORE calling or writing in about your kit. Most problems can be solved without contacting the factory.

Notice that this is not a "fine print" warranty. We want you to understand your rights and ours too! All Ramsey kits will work if assembled properly. The very fact that your kit includes this new manual is your assurance that a team of knowledgeable people have field-tested several "copies" of this kit straight from the Ramsey Inventory. If you need help, please read through your manual carefully, all information required to properly build and test your kit is contained within the pages!

1.DEFECTIVE PARTS: It's always easy to blame a part for a problem in your kit, Before you conclude that a part may be bad, thoroughly check your work. Today's semiconductors and passive components have reached incred bly high reliability levels, and it’s sad to say that our human construction skills have not! But on rare occasions a sour component can slip through. All our kit parts carry the Ramsey Electronics Warranty that they are free from defects for a full ninety (90) days from the date of purchase. Defective parts will be replaced promptly at our expense. If you suspect any part to be defective, please mail it to our factory for testing and replacement. Please send only the defective part(s), not the entire kit. The part(s) MUST be returned to us in suitable condition for testing. Please be aware that testing can usually determine if the part was truly defective or damaged by assembly or usage. Don't be afraid of telling us that you 'blew-it', we're all human and in most cases, replacement parts are very reasonably priced.

2.MISSING PARTS: Before assuming a part value is incorrect, check the parts listing carefully to see if it is a critical value such as a specific coil or IC, or whether a RANGE of values is suitable (such as "100 to

500uF"). Often times, common sense will solve a mysterious missing part problem. If you're missing five

10K ohm resistors and received five extra 1K resistors, you can pretty much be assured that the '1K ohm' resistors are actually the 'missing' 10 K parts ("Hum-m-m, I guess the 'red' band really does look orange!") Ramsey Electronics project kits are packed with pride in the USA. If you believe we packed an incorrect part or omitted a part clearly indicated in your assembly manual as supplied with the basic kit by Ramsey, please write or call us with information on the part you need and proof of kit purchase

3.FACTORY REPAIR OF ASSEMBLED KITS:

To qualify for Ramsey Electronics factory repair, kits MUST:

1.NOT be assembled with acid core solder or flux.

2.NOT be modified in any manner.

3.BE returned in fully-assembled form, not partially assembled.

4.BE accompanied by the proper repair fee. No repair will be undertaken until we have received the MINIMUM repair fee (1/2 hour labor) of $25.00, or authorization to charge it to your credit card account.

5.INCLUDE a description of the problem and legible return address. DO NOT send a separate letter; include all correspondence with the unit. Please do not include your own hardware such as non- Ramsey cabinets, knobs, cables, external battery packs and the like. Ramsey Electronics, Inc., reserves the right to refuse repair on ANY item in which we find excessive problems or damage due to construction methods. To assist customers in such situations, Ramsey Electronics, Inc., reserves the right to solve their needs on a case-by-case basis.

The repair is $50.00 per hour, regardless of the cost of the kit. Please understand that our technicians are not volunteers and that set-up, testing, diagnosis, repair and repacking and paperwork can take nearly an hour of paid employee time on even a simple kit. Of course, if we find that a part was defective in manufacture, there will be no charge to repair your kit (But please realize that our technicians know the difference between a defective part and parts burned out or damaged through improper use or assembly).

4.REFUNDS: You are given ten (10) days to examine our products. If you are not satisfied, you may return your unassembled kit with all the parts and instructions and proof of purchase to the factory for a full refund. The return package should be packed securely. Insurance is recommended. Please do not cause needless delays, read all information carefully.

FR146 • 23

Page 22 Page 24
Page 23
Image 23
Ramsey Electronics FR146 manual Ramsey Kit Warranty
Page 22 Page 24

FR146 specifications

The Ramsey Electronics FR146 is a versatile RF transmitter that has gained popularity among hobbyists and professionals alike for its reliability and performance. This compact and efficient device operates in the 146 MHz frequency range, making it suitable for various applications, including remote control systems, wireless audio, and telemetry. Its lightweight design and user-friendly interface make it an excellent choice for both beginners and seasoned RF enthusiasts.

One of the standout features of the FR146 is its ability to deliver a stable and clean signal. It employs advanced modulation techniques to ensure high-quality transmissions, minimizing interference and distortion. The device supports AM modulation, which is ideal for long-range communication due to its excellent propagation characteristics. This feature is particularly useful in outdoor environments where signals can travel considerable distances.

Another significant advantage of the FR146 is its user-adjustable output power. Users can easily modify the transmitter's power settings to suit specific needs, whether they require low power for short-range applications or higher power for extended reach. This flexibility allows for greater versatility in operation and makes it suitable for various scenarios.

The FR146 also comes equipped with a built-in tone generator, which can be used to encode audio signals. This feature allows for the integration of sound with the RF transmission, making it a perfect choice for projects that require audio broadcasting. Furthermore, the device includes a frequency stabilization circuit, ensuring that the transmitter maintains a consistent frequency even under varying temperature and voltage conditions.

In terms of construction, the FR146 is designed for durability and ease of use. It features a robust enclosure that protects the internal components from environmental factors. The device is straightforward to set up, often requiring only a few simple connections for operation. Its lightweight design enables easy mobility, making it suitable for portable applications.

Overall, the Ramsey Electronics FR146 stands out for its combination of advanced features, robust performance, and ease of use. Whether you are working on a personal project, conducting experiments, or managing professional tasks, the FR146 offers a reliable and effective solution for your RF transmission needs. Its adaptability across different applications makes it a valuable addition to any electronics enthusiast's toolkit.
Top Page Image Contents