experimented with the ISM19R and ISM24R and found that they work wonderfully with the Logi!
Look at the how the Boss used a piece of PVC and a few couplers to form a boom. He cut a slot in one end of the PVC pipe to hold the Logi antenna in place. Then he used a nylon wire tie at the end of the boom to squeeze the slotted pipe like a vise! Wow!!! Simple to make and highly effective!
LPY915 mounted on a Grid Reflector
If you plan to do the same, | LPY915 mounting Boom for a Grid Reflector |
here is a quick shopping list: |
1 Ramsey ISM19R or ISM24R (or equivalent)
1 16 1/2” piece of 1/2” PVC pipe
1 1/2” to 1” PVC coupler (non threaded)
1 3/4” to 1” PVC
coupler (threaded on the male 3/4” side only)
1 can of PVC cement
3 4” minimum nylon wire ties
LPY2 • 9
