Rangemaster R604 manual Oven accessories, Removing the shelf, Refitting the shelf

Oven accessories

The oven is supplied with a wire shelf and an enamelled grill pan, with a trivet and a handle. The wire shelf slides into the wire supports located on either side of the oven interior

(Fig.2-9).

Removing the shelf

Pull the shelf forward until the back of the shelf is up to the shelf stop (Fig.2-10). Lift the front of the shelf so the stop clears the wire support and pull clear (Fig.2-11).

Refitting the shelf

To refit the shelf, line up the shelf with the shelf supports and slide it between the two support wires until the shelf stop hits the wire support. Lift the front of the shelf so that the stop clears the support, then lower the front so that the shelf is level and push it back fully.

The shelf guard should be at the back pointing upwards.

�Fig.2-9

�

�

ArtNo.325-0033 Oven BI shelf

�

Key

A – Shelf guard, B – Front, C – Shelf stop

Fig.2-10

ArtNo.320-0011 Removing the shelf 1

Fig.2-11

ArtNo.320-0012 Removing the shelf 2

5