Rangemaster manual Residual heat indicator, ‘H’, ArtNo.315-0019RC90 zone set, The Control Panel

Models: RC90

1 20
Download 20 pages 31.79 Kb
Page 6
Image 6
ArtNo.315-0016 RC90 control panel

Fig.2-5

 

ArtNo.315-0016 RC90 control panel

 

 

 

��

��

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1.

Power ON/Power OFF

5.

Dual element selector key

7.

Timer key

11.Child lock key

 

 

2.

Cooking element ‘+’ key

 

(Indicator light above)

8.

Timer ‘+’ key

(Indicator light above)

3.

Cooking element ‘–’ key

6.

Triple element selector key

9.

Timer ‘–’ key

 

 

 

 

4.

Cooking zone digital display

 

(Indicator lights above)

10.Timer digital display

 

 

 

 

Fig.2-6

ArtNo.315-0017 RC90 controls ON

Fig.2-7

pans wastes heat, and any spillage will be burnt on. Using a lid will help the contents boil more quickly.

Always take care before touching the surface, even when the hob is turned off. It may be hotter than you think!

Residual heat indicator, ‘H’

After use, a cooking zone will remain hot for a while as heat dissipates. When a cooking zone is switched off the residual heat indicator symbol, ‘H’, will appear in the display. This shows that the cooking zone temperature is above 60°C and may still cause burns. Once the temperature has dropped to below 60°C the ‘H’ will go out.

ArtNo.315-0019 RC90 zone set

Fig.2-8

ArtNo.315-0019 RC90 zone set

The Control Panel

The control panel consists of touch sensitive controls to operate the five cooking zones, the timer and child lock features (Fig.2-5).

Operating the Hob

To switch on the hob press the On/Off key for about

2 seconds. Each of the control panel digital displays will illuminate (Fig.2-6).

Note: If further hob functions are not activated within 10 seconds it will shut down automatically.

To activate a cooking zone:

Press the appropriate ‘+’ or ‘–‘ key to activate the required cooking zone.

Pressing the ‘–‘ key will initially set the power level to 4 (Fig.2-7)while pressing the ‘+’ key will set the zone to 9, full power (Fig.2-8), and activate the preheat function (see below).

The power can be adjusted through a range from 1 to 9 by pressing the ‘+’ key to increase, and the ‘–‘ key to decrease the level.

4

Page 6
Image 6
Rangemaster manual Residual heat indicator, ‘H’, ArtNo.315-0019RC90 zone set, The Control Panel, Operating the Hob