- 11 -
Grease filters and impeller(s).
The grease filters, impeller(s) and grease rail should be cleaned frequently.Use a warm detergent
solution. Grease filters and impeller(s) are dishwasher safe.
Remove grease filters by pushing them towards the back of hood and rotating downward.
Stainless steel cleaning: How to maintain its « BRIGHT LOOK »
Do:
- Regularly wash surfaces with clean cloth or rag soaked with warm water and mild soap or liquid dish detergent.
- Always clean in the direction of original polish lines.
- Always rinse well with clear water (2 or 3 times) after cleaning.Wipe dry completely.
- You may also use a specialized household stainless steel cleaner.
19. LIGHT BULBS
This insert uses 50W halogen lamps (120V, 50W, PAR 20) (Purchase separately).
Install the lamps by rotating them clockwise into their socket holder.
20. INSTALL FILTERS
It is recommended to install side filters first and finish with center one(s).
1. Insert upper end of filter into the insert (finger sized cup side).
2. Raise lower end of filter to position it into grease rail inside of hood and pull.
3. While pulling the filter, slide it under the inner retaining piece.
Replacement filters are available from your dealer.See inside label insert for size and part number.
HD0086 HD0031 1
1) Finger sized cup
1
3
2

Baffle Filters

Baffle filters are available as an option.To order them, refer to the table below to
find the right filter kit number for your insert. To install them, refer to instruction
sheet included with baffle filter kit.
KIT #
RBFIP33
RBFIP45
INSERT MODEL
RMIP33
RMIP45
HD0011
BAFFLE FILTER (TYPICAL)
21. USE AND CARE