2. Positioning Your Appliance
Choosing the right location
This appliance should be installed in a room, which is dry and well ventilated.
In order to ensure adequate ventilation, the appliance should be at least 15 mm clear on all sides from kitchen cabinets, and any units placed above the appliance must be clear by
15 mm – allowing adequate ventilation for the appliance. See clearance diagram.
If this appliance is situated in a cold environment (shed, out house, garage etc.) it will affect its performance. You may find that the performance of the appliance is not consistent and this may damage foods. A consistent ambient temperature of 10°C or above is recommended.
Connection to the electricity supply
Connect the appliance to the electrical supply (220 – 240V ~ 50Hz) with the plug and lead, which are fitted. Connections to the mains supply should be in accordance with local regulations.
�����
����
����� | ����� |
15mm
If located close to a corner adequate spacing must be left for door opening and removal of shelves. Refer to diagram.
This appliance should be 10 cm at least from any electric or gas cooker and 30 cm from any coal or oil stove. If this is not possible, ensure that appropriate insulation is used.
Avoid exposing the appliance to direct sunlight, and sources of heat (radiators, heaters, cookers, etc.).
This appliance will operate within a range of 187- 253V. Operation outside this range may result in damage to the control panel, thermostat or compressor, unless a regulator with a capacity of 750W, or higher, is installed.
Thesocket.appliance must be plugged into an earthed
•Always make sure that the plug is accessible after the appliance has been positioned.
•The refrigerator is supplied with a standard
Care for the external cable
•Hold the plug, not the electrical cable, when unplugging the refrigerator.
•Ensure that the refrigerator does not trap the electric cable.
•Do not step on the cable.
•Avoid damage to the electric cable when moving the refrigerator.
Damaged electrical cable
When the electrical cable is damaged or worn, turn off the refrigerator and consult an authorized agent for replacement.
If inflammable gas leaks in the vicinity of the refrigerator
•Turn off any leaking valve.
•Open the doors and windows.
DO NOT under any circumstances unplug electrical appliances in the vicinity of the leak.
2
