Operation (Continued)
20.LOCK BUTTON (LOCK): Disables the Frequency Selector Control, UP/DOWN buttons on the front control panel and remote UP/DOWN buttons on the microphone. Pressing this switch again will
21.UP/DOWN SELECTOR: These buttons are used to increase or decrease the frequency digit above the SHF cursor on the display.
Operation (Continued)
Rear Panel
1 2 3 4
5
1.ANTENNA: This jack accepts a 50 ohms coaxial cable with a
2.CW KEY: The CW key is used for Morse Code operation. To operate connect a CW key to this jack, and place the mode switch in the CW position.
3.EXTERNAL SPEAKER: This jack accepts a 4 - 8 ohm 5W external speaker. When an external speaker is connected to this jack, the built- in speaker is disabled.
4.PA SP.: An 8 ohm, 4W PA speaker may be connected to this jack for PA operation. This feature operates by placing mode selector in PA position.
5.POWER: This socket accepts a 13.8 VDC power cable with
- 8 - | - 9 - |
