Operation (Continued)
Frequency Selection
Frequency selection in the
1.The first method of frequency selection uses the SHF (Shift) key and the ▲(UP)/▼(DOWN) keys located on the front panel. To accomplish this, press the SHF key until the display cursor on the frequency display is positioned under the frequency digit that is to be changed. Use the”▲” key to increase the number. Press the “▼” key to decrease the number. Perform the steps described above for each digit until the desired frequency is displayed in the LCD frequency display window.
2.The second method of frequency selection is performed using the SHF key and the FREQUENCY select knob located on the front panel. Use the SHF key in the manner described above to select the digit to be changed. Rotate the FREQUENCY selector clockwise to increase the selected digit or counterclockwise to decrease the selected digit.
3.The third method of frequency selection is through the use of the SHF key and the remote UP and DOWN buttons located on the
microphone. Frequency selection by this method is accomplished in the same manner as with the “▲” key and the “▼” key on the front panel keypad.
Sometimes when receiving more than one station on a fixed frequency such as on a “Net” or “round table” operation, it is convenient to be able to vary the receive frequency slightly without changing the transmit frequency. To do this, rotate the clarifier control while an off frequency station is transmitting. You can vary the receiver frequency by ±2.5 KHz for clearest voice reception. The clarifier can be optionally modified to vary both Transmit and Receive frequencies together.
Mode Selection
To Select an operating mode, rotate the MODE selector, and place it in the desired operating mode position.
RF Power Control
This feature allows the adjustment of the RF output power continuously over the range of 1W through 25W.
- 12 - | - 13 - |
