13
Console Mounting
To mount the console:
1. Remove the backing paper from the installation gasket.
2. Attach the installation gasket to the back of the display plate.
3. Place display into the aperture, push 4 x M4 screws through holes.
4. Assemble 2 off, side plates onto M4 screws and secure using a plain and a
spring washer, affix nuts and tighten.
5. To each side of the display loosely attach in the following order, a metal
washer, bracket, plastic washer, cam, penny washer, spring washer and M8
bolt
6. Operate the cams to clamp the display into position.
7. Tighten M8 bolts.
8. Clip on the front bezel.
-35.027˚
-35.027˚
20.024˚
20.024˚
D6314-1
6 mm (0.24 in) min.
18 mm (0.71 in) max.
1
2
4
3
5
6
7
8