Razor 13010800, 13010850 Set up and usage instructions, Unfolding the scooter for first time use

Set up and usage instructions

qUnfolding the scooter for first time use.

1 Insert and secure the left and	2 Make certain BOTH handlebars	3 To release the folding
right handlebars by pressing the	are properly locked onto the T-bar.	mechanism, put one foot on the
spring-loaded buttons and		deck plate and push joint release
inserting them into the T-bar.		lever down. Raise handlebars up
		until securely locked in the upright
		position.

Note: The joint lever is spring-	4 To adjust the height of the handlebars, open the quick-release lever and
loaded and will automatically lock	slide the T-bar to the desired position and resecure the quick release lever to
in the upright position when fully	lock into place. If the T-bar is raised to the maximum height, depress the push
upright.	button located directly below the quick release lever to lower the T-bar.

Note: The tension of the quick- release lever can be adjusted by tightening or loosening the Allen bolt. Be careful not to over-tighten. You should always be able to open and close the quick-release lever by hand and the T-bar should slide freely with the quick-release open.

3

WARNING: Failure to properly engage the spring-loaded buttons may cause the handlebars to dislodge while riding and may cause you to lose control and fall. When correctly engaged the handlebars will not rotate nor will they move sideways. Note that when properly engaged, the spring- loaded buttons are clearly visible in the holes on the T-bar.

WARNING: Keep your fingers clear of the pivoting mechanism when folding or unfolding the scooter. Make sure others are standing clear.

WARNING: Failure to properly secure the quick-release lever may cause the T-bar to telescope up or down while riding which may cause you to lose control and fall.