Razor 13010840, 13010850, 13010800 Installing your chalk, How to Ride, Using the Chalk Bar

Set up and usage instructions

qInstalling your chalk

1 Insert the tapered end of the	2 Twist chalk clockwise 1/4 turn
chalk into the spring.	until chalk is set securely in the
	spring. Periodically turn chalk as
	needed.

qHow to Ride

Place one foot on the baseboard, push forward with the other foot. Steer. For enhanced cornering, lean slightly into the direction of the turn. For controlled stops, apply the brake by stepping on the rear fender/brake. Razor recommends that you practice applying the brake at various speeds and in an open area free from obstructions before riding your Razor around others.

qUsing the Chalk Bar

When riding, place ball of foot on the chalk bar and apply pressure until the chalking mechanism clicks into place. Only use enough pressure to cause chalk to make a mark. To stop chalking, place ball of foot on chalk bar and apply pressure until it clicks to the desired position.

1Up Position - No chalking 2 Down Position - Chalking

WARNING: Keep fingers clear of chalk bar hinge and fender brake.

NOTE: Chalk is non-toxic. Conforms to ASTM4236.

Chalk washes off with water for easy clean-up.

WARNING: Applying too much pressure on the chalk bar may cause loss of control.

NOTE: Using any other part of the foot or full foot may activate the brake and prevent the chalk action.

NOTE: Chalk marks and chalk life will vary based on the amount of pressure applied to the chalk bar and the smoothness of the riding surface.

Need Help? Visit www.razor.com for replacement parts, product support and a list of authorized service centers or call toll-free at 866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacific Time.

4