Razor 13010850 Check before riding, Collar Clamp, Wheels and Bearings, Cleaning Your Scooter

Check before riding

qCollar Clamp

Using a 5mm Allen key, check that the collar clamp bolt is tightened securely. This part is tightened and quality inspected at the factory but there is a slight chance that the effects of shipping or handling may have caused this bolt to become loose.

qWheels and Bearings

Under normal circumstances and conditions, Razor wheels and bearings are maintenance free. Nonetheless, it is the responsibility of the owner or guardian to periodically inspect the wheels for wear and tear, the axle for proper tightness, and bearings for side-to-side play and loose parts. When a wheel or wheel bearing develops play, this is an indication of excess wear and replacement is necessary. Replace immediately with only genuine Razor wheels. Wheels other than genuine Razor wheels may not be compatible with your Razor scooter. The use of anything other than genu- ine Razor replacement parts may affect your safety and will void your warranty.

qCleaning Your Scooter

Wipe with a damp cloth to remove dirt and dust.

Do not use industrial cleaners or solvents as they may damage the surfaces. Do not use alcohol, alcohol-based or am- monia-based cleaners as they may damage or dissolve the plastic components or soften the decals or decal adhesive.

5

WARNING: Wheelies will break the chalk bar. Other stunt-type riding reduces your ability to maneuver and control the scooter. Take the necessary precautions, such as wearing appropriate protective gear and practice in a area safe for stunt riding and free from obstructions.

NOTE: Worn wheels, bearings and chalk cartridges are considered normal wear-and-tear and are not covered by the Razor Warranty.