3
rePaIr anD MaInTenanCe
q Inflating the Tires
Tires are inflated when shipped, but they invariably lose some pressure between the point of manufacturing and
purchase.
1 Using a bicycle style tire pump
equipped for a Schrader-type valve,
inflate the tires to the PSI
indicated on the sidewall of the
tires.
Note: The pressurized air supplies
found at stations are designed to
inflate high-volume automobile
tires. If you decide to use such
an air supply to inflate your Dune
Buggy tires, first make sure the
pressure gauge is working, then
use very short bursts to inflate to
the correct PSI. If you inadvertently
over-inflate the tire, release the
excess pressure immediately.
Turn power switch off before conducting any maintenance procedures.
q replacing the Fuse WARNING: To prevent
shock make sure power is in the
“off” position and charger is not
plugged into unit while conducting
any maintenance procedures.
4 Close the fuse box.
3 Remove fuse and replace with a
new one of equal amperage.
Note: Amperage is located on top
of fuse. Fuse must be replaced with
one of equal amperage.
Amperage
number
1 Make sure the power switch is
turned off.
2 Open fuse box located on the
battery.
TurnPOwerOFF