BEFORE YOU BEGIN
Remove contents from box and check parts against part diagram below. Remove the foam separators that protect the components from damage during shipping. Inspect the contents of the box for scratches in the paint, dents or kinked cables that may have occurred during shipping. Because the Rip Rider 360˚ was partially assembled and packed at the factory, there should not be any problems, even if the box has a few scars or dents.
❑Estimated Assembly and Set-Up Time
Razor recommends assembly by an adult with experience in bicycle mechanics.
Allow up to
Front Fork Assembly |
| |
| Allen Socket Screw | |
| Washer | |
Front Caliper Brake |
| |
| Steering Bolt | |
Washer | Seat | |
Combinatory Nut | Frame | |
Assembly | ||
| ||
Front Wheel Assembly |
| |
Right | Locknut | |
Allen Socket Screw | ||
Pedal |
Allen Long Screw
Left Pedal
Rear Castor
Wheels
❑Required Tools
Some tools are supplied; however, we recommend the use of mechanic’s grade tools. Use the supplied tools only as a last resort.
(2) 5mm | 10mm, 13mm and 15mm | |
hexagonal key wrenches | open end wrenches | for Schrader valve tires, |
(included) | (included) | with pressure gauge |
WARNING: DO NOT USE
The RipRider 360˚ has been built to certain Razor design specifications. The original equipment supplied at the time of sale was selected on the basis of its compatibility with the frame, fork and all other parts. Certain aftermarket products may or may not be compatible.
Need Help? Visit our web site for replacement parts, product support, live chat and a list of authorized service centers at www.razor.com or call
2
